Latest activity
-
KKirk Tatom replied to the thread ISP Technologies... Tell me about them because the salesman couldn't..I have two Vector FS8 and they are incredible. I use them with my Fractal to have stereo FRFR monitoring during shows and they are...
-
I am a passive cab (rack/stacks) guy that took the active plunge last November. I purchased a pair of "used" Yorkville PS12p mid/high... -
RCF 945a top / RCF 8004 sub combo RCT 932 top / RCF 905 sub combo
-
Ben Lawrence reacted to Douglas R. Allen's post in the thread 15" powered subs n top combo with
Like.
If you are looking at the Nxl 14 you might want to also look at the DB IG2T. 2-8 inch woofers. 1.4 horn (1 inch exit) 128 db's output... -
Carl Klinkenborg reacted to Ben Lawrence's post in the thread Thinking about getting a CNC anyone running one? with Like.
Thanks for the words of wisdom Carl. Appreciate that. -
Ben Lawrence replied to the thread Thinking about getting a CNC anyone running one?.Thanks for the words of wisdom Carl. Appreciate that.
-
Carl Klinkenborg replied to the thread Thinking about getting a CNC anyone running one?.Processed woods (we cut mainly MDF) are very tough on cutters, but carbide will be fine on low runs in ply and softwoods - they are...
-
SSteven Hirsch replied to the thread QSC TouchMix 16 sound problem fixed (other touchmix versions may also get this).I've had my face in a Touchmix 16 for most of the day. Successfully diagnosed and replaced a bad Cirrus Logic ADC chip that handles...
-
Ben Lawrence replied to the thread Thinking about getting a CNC anyone running one?.Well I was looking at a little hobby machine with a budget of around 1500$. No metal cutting in the plans but are you saying the pcd...
-
Carl Klinkenborg replied to the thread Thinking about getting a CNC anyone running one?.Make sure the machine is properly RIGID! We naively bought a four foot square machine which we soon discovered was based on a much...
-
RRiley Casey reacted to Ben Lawrence's post in the thread Thinking about getting a CNC anyone running one? with Like.
It seems there is a lot of crossover with woodworking on here especially how it relates to speaker cabs. I am considering picking up a...
-
It seems there is a lot of crossover with woodworking on here especially how it relates to speaker cabs. I am considering picking up a...
-
GRobert, just wondering if this plan ever went any further than here? It’s a great design. I have sourced the 464 horn and drivers. Now...
-
GRegarding the multiple driver arrangement, I am currently busy with a new project that houses 4 hornloaded Oberton 10MB300's. HF driver...
-
GGunter Tack reacted to Klaus Zimmermann's post in the thread FREE SUB PLAN: Dual Lab12 (Front Loaded) by Welter Systems with Like.
Re: FREE SUB PLAN: Dual Lab12 (Front Loaded) by Welter Systems same here, possible over the easter weekend